Specifications: \n \nWith a combination of good flow and good pressure, these pumps are perfect for your in-ground sprinkler system. \n
\n - Superior performance at depths to water of 20' or less
\n - Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
\n - Ready-to-install 230 volt motor (dual voltage)
\n - Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
\n
\n
\n \n \n| Body Construction | \nThermoplastic | \n
\n \n| Horsepower | \n1 HP | \n
\n \n| Maximum Capacity | \n55 GPM | \n
\n \n| Flow at 10' Lift and 40 PSI | \n28 GPM | \n
\n \n| Max Lift | \n25' | \n
\n \n| Max Discharge Pressure | \n46 PSI | \n
\n \n| Maximum Total Pressure (Inlet + Pump Pressure) | \n55 PSI | \n
\n \n| Suction Size | \n1 ½" NPT (female) | \n
\n \n| Discharge Size | \n1 ½" NPT (female) | \n
\n \n| Amp Draw (full load) | \n7.4 amps on 230v / 14.8 amps on 115v | \n
\n \n| Voltage | \n230V / 115V AC, 60 Hz | \n
\n \n| Maximum Water Temperature | \n140°F (60°C) | \n
\n \n
\n
