Specifications: \n \nGreat performance at depths to 25' (depth-to-water) in a tough cast iron pump. \n
\n - Reliable performance to depths of water 25' or less
\n - Rugged cast iron construction maximizes pump life
\n - Heavy-duty dual-voltage motor 1/2 HP preset at 115 V
\n - Pre-wired pressure switch preset for 30/50 PSI operation
\n - Self priming after pump housing is initially filled. Check valve or foot valve required.
\n
\n
\n \n \n| Body Construction | \nCast Iron | \n
\n \n| Horsepower | \n1/2 HP | \n
\n \n| Maximum Capacity | \n8.5 GPM | \n
\n \n| Flow at 10' Lift | \n6.5 GPM | \n
\n \n| Max Lift | \n25' | \n
\n \n| Max Shut-Off Pressure | \n65 PSI | \n
\n \n| Maximum Inlet Pressure | \n | \n
\n \n| Pressure Switch Setting | \n30/50 | \n
\n \n| Suction Size | \n1-1/4" NPT | \n
\n \n| Discharge Size | \n1" NPT | \n
\n \n| AMP Draw (full load) | \n8.5 on 115v / 4.2 amps on 230v | \n
\n \n| Voltage | \n115v / 230v AC, 60 Hz (factory pre-set to 115v) | \n
\n \n| Recommended Breaker | \n15 amp | \n
\n \n
