Goulds 2WD Submersible 2" Non-Clog Sewage Pump Dual Seal with Seal Sensor Probe
This pump is designed for effluent, sewage or wastewater application and is capable of handling sewage containing non-abrasive 2 inch maximum solids.
| Series |
2WD Non-Clog Sewage Pumps |
| Manufacturer Part Number |
2WD51E4AA |
| UPC |
69766603505 |
| Capacity |
up to 183 GPM |
| Material |
Cast Iron |
| Shaft Seal Material |
SiC/SiC/BUNA (lower) |
| Speed |
3500 RPM |
| HP Rating |
1 HP |
| Hz |
60 Hz |
| Phase |
3 |
| Voltage |
460V |
| Impeller Material |
Cast Iron Impeller |
| Impeller Diameter/Specs |
3.75 in. |
| Discharge NPT |
2 in. NPT |
| Cord Length (Power and Sensor) |
20 ft. |
| Sensor Option |
N/A |
| Casing Paint Option |
None |
Features
- Cast iron, semi-open or enclosed, non-clog impeller; dynamically balanced with pump out vanes for mechanical seal protection
- Cast iron, flanged volute type casing for maximum efficiency. Designed for easy installation on A10-20 guide rail
- Dual mechanical seals
- Lower: Silicon-Carbide vs. Silicon-Carbide sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
- Upper: Carbon vs. Ceramic sealing faces, stainless steel metal parts, BUNA-N elastomers
- Seal sensor probe located in oil-filled chamber. If pumpage should begin to leak past lower seal, it indicates to pump control panel a fault has occurred. Requires optional seal fail circuit in the control panel
- Corrosion resistant, 400 stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
- 300 series stainless steel fasteners
- Capable of running dry without damage to components
- Designed for continuous operation when fully submerged
- Provided with with a 2 bolt companion flange with 2 inch NPT, vertical discharge
- Capacitor start motors for maximum starting torque.
Applications
- Sewage systems
- Dewatering/effluent
- Water transfer
- Light industrial
- Commercial applications
