Summary: The SVF-pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.
-
Longer Power Cord - Standard 50ft. high temperature power cord on pumps.
-
304SS Motor Housing - Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
-
Three Seal Motor Protection -Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
-
More Motor Protection - Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.
Tough Pump Construction - Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Details:
GENERAL DATA | MAX. FLOW: GPM | 253 |
| MAX. HEAD: ft | 30.8' |
| PUMP TYPE | Non Clog Vortex, High Temp |
| DISCHARGE SIZE | 3" NPT-F |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | 16.5" |
| SHIPPING WEIGHT:lbs | 165 |
CONSTRUCTION/MATERIAL DATA | MOTOR CASING | 304SS |
| PUMP VOLUTE | Cast Iron |
| LIP SEALS & O-RINGS | FKM |
| ROTOR SHAFT | 304 SS |
| EXTERNAL HARDWARE | 304 SS |
| QTY. OIL IN SEAL CHAMBER | 3.4 U.S. FL. OZ. |
| QTY. OIL IN MOTOR STATOR | OIL-FILLED W/ ISO 32, NSF FOOD GRADE MINERAL OIL |
ELECTRICAL/MOTOR DATA | MOTOR RATING: HP | 3 |
| MOTOR RPM | 1750 |
| MOTOR INSULATION CLASS | R, 428° (220°C) |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 208, 3ph-60 Hz |
| CURRENT F.L.A. | 9.45 |
| MOTOR PROTECTION | Thermal Sensor Embedded In Each Winding Phase, 300°F (149°C) |
| POWER CORD: GAGE; LENGTH | A.W.G 14/4, 33', HIGH TEMP RATED CORD |
| MAXIMUM LIQUID TEMPERATURE | 200° F |
