Summary: Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering. Used in the following U.S. industries: Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
- Virtually unbreakable
- Compact and lightweight. Only 13.5 Lbs.
- Never rusts. Excellent resistance against acids, alkalis.
- Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
- Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications. Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
Details:
GENERAL INFORMATION | MODEL | TIGF32-9NL |
| PART NUMBER | 201633 |
| METAL FITTED | TITANIUM |
| LIP SEAL: LOWER | EPDM |
| LIP SEAL: UPPER | EPDM |
| LEVEL SWITCH | N/A |
GENERAL DATA | MAX. FLOW: GPM | 46 |
| MAX. HEAD: ft | 27' |
| PUMP TYPE | Top or Side Discharge, Chemical Resistant |
| STRAINER OPENING | 0.25 |
| DISCHARGE SIZE | 1-1/4" NPT-F and 1-1/2" Tapered Hose |
| MAX. SUBMERGED DEPTH | 33' |
| MIN. SUBMERGED DEPTH | 3.5" |
| SHIPPING WEIGHT:lbs | 17 |
CONSTRUCTION/MATERIAL DATA | IMPELLER - MULTI VANE | Noryl GTX830 |
| ROTOR SHAFT | Titanium |
| EXTERNAL HARDWARE | Titanium |
| PUMPTOPCOVER | Ultramid B3 WG7 |
| PUMP HANDLE | Polypropylene |
ELECTRICAL/MOTOR DATA | MOTOR RATING: HP | 0.4 |
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | F |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 115, 1PH-60Hz |
| CURRENT F.L.A. | 5 |
| MOTOR PROTECTION | Thermal Breaker, 150° C |
| POWER CORD: GAGE; LENGTH | A.W.G. 16/3; 15', EPDM |
| MAXIMUM LIQUID TEMPERATURE | 135°F - Continuous Duty 195°F - Intermittent use submerge less than 20 minutes |
| Seal Minder® | Not Available |
